Industries

LiDAR Drone Surveys by Industry

Drone On Demand captures and processes LiDAR for seven kinds of project across South East Queensland and Northern NSW, including single-pass radiometric thermal and 3D LiDAR for utility and commercial solar farms. Pick your industry to see the problems we solve, the deliverables and common questions.

  • 01 / Volumetrics

    Quarries & stockpiles

    Stockpile and pit volumes for quarries, mines and depots, captured from the air so nobody has to walk the piles. Recurring month-end captures use the same control and base surfaces so figures compare like for like.

    • Classified point cloud (.las / .laz)
    • Colourised point cloud (RGB)
    • Digital Elevation Model (DEM)
    • Stockpile and cut/fill volume calculations
    Stockpile Volumetrics for Quarries and Extractive Sites
  • 02 / Monitoring

    Construction

    Repeat LiDAR capture for earthworks cut/fill, progress and as-built records. Each capture is a measured 3D surface, so engineers and QS teams can compare one stage with the next or with the design surface.

    • Point cloud (.las / .laz)
    • Colourised point cloud (RGB)
    • DEM, DSM and contour outputs
    • Cut/fill and surface comparison reports
    Construction Monitoring and Earthworks LiDAR Capture
  • 03 / Corridors

    Power & corridors

    LiDAR capture along powerlines, pipelines, roads and rail corridors. Classified point clouds separate ground, vegetation and structures, so encroachment and clearance can be mapped and delivered in GIS-ready formats.

    • Classified point cloud and colourised point cloud
    • Vegetation classification and encroachment outputs
    • Clearance and risk reporting outputs
    • Orthophoto corridor strips
    Powerline and Corridor LiDAR Mapping
  • 04 / Topographic

    Surveyors & engineers

    LiDAR capture and processed outputs for survey and engineering firms: classified point clouds, DEMs and contours to your coordinate system and spec. You certify, we capture. Not a substitute for a registered surveyor's sign-off.

    • Classified point cloud (.las / .laz) to agreed classes
    • Colourised point cloud (RGB) and orthophoto context
    • DEM, DSM and contour outputs
    • Planimetric-ready datasets where scoped
    Topographic LiDAR Capture for Surveyors and Engineers
  • 05 / Farm mapping

    Agriculture

    Paddock elevation maps, contours, low spots and water flow paths for farms and growers, plus dam and earthwork volumes. Measured terrain to plan drainage, banks and earthworks.

    • Point cloud (.las / .laz)
    • DEM with drainage overlays
    • Contour outputs for paddock planning
    • Orthophoto (high-resolution RGB)
    Agricultural LiDAR Mapping for Farms and Growers
  • 06 / Environment

    Environmental & council

    Bare-earth DEMs, canopy models, change detection and planimetric mapping for councils and environmental consultants. Repeat captures with consistent control support flood, erosion, wetland and rehabilitation monitoring.

    • Point cloud (.las / .laz)
    • Bare-earth DEM and canopy surface outputs
    • Change-detection datasets for repeat surveys
    • Planimetric mapping outputs for roads and assets
    Environmental and Council LiDAR Mapping
  • 07 / Solar Thermal + LiDAR

    Solar & thermal

    Co-registered 1280×1024 radiometric thermal and classified 3D LiDAR captured in a single flight pass. Built for solar O&M teams, renewable asset managers and EPC project managers across commissioning, Defect Liability Period (DLP) handover, post-hail/storm checks, underperformance investigations and module warranty claims to IEC TS 62446-3.

    • IEC TS 62446-3 thermal inspection PDF report with paired thermal/visual thumbnails and normalised delta-T callouts
    • CMMS-ready anomaly schedule (.csv) and geolocated fault pin drops (.kml / .shp)
    • Co-registered classified 3D LiDAR point cloud (.las / .laz) and bare-earth DEM (.tif)
    • Perimeter vegetation shading and canopy encroachment layers
    Utility-Scale Solar Thermal (IEC 62446-3) & 3D LiDAR Mapping