# Utility-Scale Solar Thermal (IEC 62446-3) & 3D LiDAR Mapping

> Single-pass 1280×1024 radiometric thermal and co-registered 3D LiDAR capture for utility-scale and commercial solar farms across SEQ and Northern NSW.

Co-registered 1280×1024 radiometric thermal and classified 3D LiDAR captured in a single flight pass. Built for solar O&M teams, renewable asset managers and EPC project managers across commissioning, Defect Liability Period (DLP) handover, post-hail/storm checks, underperformance investigations and module warranty claims to IEC TS 62446-3.

Audience: Solar O&M leads, renewable asset managers and solar EPC project managers. Service area: South East Queensland and Northern NSW.

## Separate genuine electrical faults from 3D shading, tracker tilt and terrain issues in one pass

- Flying 2D thermal inspections and 3D site surveys separately doubles site access coordination and leaves thermal and terrain datasets disconnected.
- Uncalibrated thermal flights trigger false work orders when plane-of-array irradiance drops or wind cools modules mid-capture.
- Solar O&M and asset teams need CMMS-ready CSV anomaly schedules and geolocated KML pins backed by 3D shading and drainage surfaces, not folders of raw JPEGs.

## Deliverables

- IEC TS 62446-3 thermal inspection PDF report with paired thermal/visual thumbnails and normalised delta-T callouts
- CMMS-ready anomaly schedule (.csv) and geolocated fault pin drops (.kml / .shp)
- Co-registered classified 3D LiDAR point cloud (.las / .laz) and bare-earth DEM (.tif)
- Perimeter vegetation shading and canopy encroachment layers
- Tracker row alignment, trench scouring and surface drainage contours (.dxf / .shp)
- Checkpoint accuracy report and field plane-of-array irradiance/wind log (PDF)

Delivered in agreed coordinate systems and formats.

## Turnaround and scope

Target turnaround of about 48 hours for standard deliverables (point cloud and DEM) on smaller sites, counted from end of capture. Site dependent, not guaranteed.

Every project is scoped first. You then get a written fixed-price quote for the agreed scope, based on site size, location, access and deliverables, before any work starts.

## FAQ

### Why capture radiometric thermal and 3D LiDAR in a single flight pass on a solar farm?

Capturing 1280×1024 radiometric thermal (4× the pixel density of standard 640×512 sensors) and 3D LiDAR simultaneously means every thermal anomaly is co-registered with the 3D point cloud in the same coordinate system (MGA2020/AHD). Your O&M team can immediately verify whether a hot cell, diode or string is an internal electrical defect or caused by perimeter tree shading, tracker row tilt or trench erosion—from one site mobilisation.

### How do your solar thermal inspections comply with IEC TS 62446-3?

We capture radiometric thermal data at a minimum 600 W/m² plane-of-array (POA) irradiance logged continuously on site with a tilted pyranometer matching the array angle, wind speed under 4 m/s, ambient temperature swing within 5°C, and camera angle within 10° of perpendicular to the module plane. Every delta-T reading is normalised to 1,000 W/m² reference irradiance and classified into <2 K (thermal noise, filtered out), 2–10 K (minor / tracked anomaly), and >10 K (serious anomaly / maintenance work order required).

### When do solar asset managers, O&M leads and EPCs use single-pass thermal + LiDAR?

Alongside routine annual O&M inspections, single-pass capture is designed for high-stakes off-cycle triggers: (1) post-hail and severe storm damage assessments, (2) EPC commissioning and pre-Defect Liability Period (DLP) expiry sign-offs, (3) unexplained yield underperformance investigations, and (4) module manufacturer warranty claim evidence.

### What deliverables do solar O&M and asset management teams receive?

You receive a co-registered 3-part package: (1) an IEC TS 62446-3 PDF report with paired thermal/visual thumbnails, environmental logs and normalised delta-T callouts, (2) a CSV fault schedule formatted for direct import into your CMMS or maintenance platform, and (3) geolocated KML/SHP fault pins co-registered with classified LAS/LAZ point clouds, GeoTIFF DEMs and DXF drainage/shading contours.

### How does 3D LiDAR help with solar drainage, erosion and shading disputes?

The classified 3D LiDAR point cloud maps bare-earth terrain under and around the tables, identifying stormwater scouring along cable trenches, ponding zones, tracker post settlement and exact perimeter canopy heights that cast morning or afternoon shadows across strings.

### How accurate is the LiDAR terrain and elevation data?

Target vertical accuracy around 3 cm RMSE on open, hard ground with ground control; vegetation, terrain and site conditions affect results. Each project includes an accuracy report against check points.

### What is the turnaround time?

Target turnaround of about 48 hours for standard deliverables (point cloud and DEM) on smaller sites, counted from end of capture. Site dependent, not guaranteed. Combined IEC TS 62446-3 thermal and LiDAR reporting timelines are confirmed in the written quote.

### Which areas do you cover?

We're based in Palmwoods on the Sunshine Coast and cover South East Queensland and Northern NSW. Other regions are by arrangement.

## Request a quote: solar thermal + LiDAR

Enquiry only, no obligation and no payment. Enquiries welcome; earliest start dates are confirmed in each quote, subject to approvals. https://droneondemand.com.au/industries/solar#enquire

---

Canonical HTML: https://droneondemand.com.au/industries/solar
Drone On Demand Pty Ltd · ABN 79 639 850 365 · Palmwoods, Sunshine Coast QLD 4555, Australia
0466 538 887 · info@droneondemand.com.au
More: https://droneondemand.com.au/llms.txt · https://droneondemand.com.au/sitemap.xml
