# Drone On Demand: LiDAR drone surveys for SEQ and Northern NSW

> High-density LiDAR point clouds, elevation models and contours for quarries, construction, corridors, surveyors, farms and councils, plus single-pass radiometric thermal and 3D LiDAR for utility and commercial solar farms. Built for survey workflows, delivered in your formats.

Drone On Demand Pty Ltd is a LiDAR drone surveying business based in Palmwoods, Sunshine Coast QLD 4555, Australia, serving South East Queensland and Northern NSW.

## Key specifications

- Accuracy: Target vertical accuracy around 3 cm RMSE on open, hard ground with ground control; vegetation, terrain and site conditions affect results. Each project includes an accuracy report against check points.
- Turnaround: Target turnaround of about 48 hours for standard deliverables (point cloud and DEM) on smaller sites, counted from end of capture. Site dependent, not guaranteed.
- Coordinate system: MGA2020 / AHD, or your project datum
- Standard outputs on every project: LAS point cloud + DEM

## Industries

- [Quarries & stockpiles](https://droneondemand.com.au/industries/mining): Month-end stockpile volumes without sending staff onto the piles. (Volumes · DEM · Contours)
- [Construction](https://droneondemand.com.au/industries/construction): Repeat capture for progress, cut/fill tracking and as-built records. (Cut/fill · Progress · As-built)
- [Power & corridors](https://droneondemand.com.au/industries/utilities): Vegetation encroachment and clearance analysis along linear assets. (Clearance · Veg · Profiles)
- [Surveyors & engineers](https://droneondemand.com.au/industries/surveyors): Classified point clouds to your spec. You certify, we capture. (LAS/LAZ · DEM · DXF)
- [Agriculture](https://droneondemand.com.au/industries/agriculture): Paddock elevation, flow paths, drainage and dam volumes. (Elevation · Flow · Dams)
- [Environmental & council](https://droneondemand.com.au/industries/environmental): Erosion, floodplain, rehabilitation and planimetric mapping. (Change · Bare earth · Planimetrics)
- [Solar & thermal](https://droneondemand.com.au/industries/solar): Single-pass 1280×1024 radiometric thermal (IEC 62446-3) and 3D LiDAR for solar farms. (ΔT CSV/KML · Shading · LAS)

## How it works

1. **Enquire**: Tell us about your site and the outputs you need. No obligation.
2. **Scope & quote**: We scope the site, outputs and formats, then send a fixed quote.
3. **Capture**: LiDAR and RGB capture to an agreed plan, with ground control where needed.
4. **Processing & QA**: Raw data is processed, georeferenced and quality checked before release.
5. **Delivery**: Agreed deliverables in your formats, with optional CAD, GIS and change detection.

## Deliverables

Standard:
- Point cloud (LAS / LAZ)
- Colourised point cloud (LAS (RGB))
- Digital elevation model (GeoTIFF)
- Digital surface model (GeoTIFF)
- Contour lines (DXF / SHP)
- Accuracy report (PDF)
- Cloud access (30 days after delivery)

Optional:
- Orthophoto (high-res RGB) (GeoTIFF)
- 3D mesh / model (OBJ / LAS)
- Cross-sections (DXF / PDF)
- Volume calculations (PDF / CSV)
- Change detection (GeoTIFF / PDF)
- CAD / GIS outputs (DWG / DXF / SHP)
- Radiometric thermal (IEC 62446-3) (PDF / CSV / KML)

## Example applications (illustrative, not client case studies)

### Highway expansion corridor

- Challenge: A long linear corridor with mixed terrain and constrained access.
- Approach: LiDAR capture with repeatable control points to support design, planning and contractor coordination.
- Output: A complete point-cloud and elevation dataset delivered in agreed formats for project teams.

### Urban redevelopment site

- Challenge: Detailed site conditions were needed before engineering and construction staging.
- Approach: Single-capture LiDAR and RGB survey to produce terrain, surface and contour deliverables.
- Output: Shareable outputs for planners, engineers and contractors using the same source dataset.

### Flood and drainage assessment area

- Challenge: Dense vegetation and uneven ground made traditional coverage slow and inconsistent.
- Approach: LiDAR capture focused on extracting bare-earth terrain and drainage paths.
- Output: Consistent baseline data that can be repeated for later change monitoring.

### Utility-scale solar DLP handover & storm check

- Challenge: A solar asset team needed both IEC TS 62446-3 module fault verification and a 3D check of trench scouring and perimeter shading in a single site window.
- Approach: Single-pass co-registered 1280×1024 radiometric thermal (logged at ≥600 W/m² POA irradiance with a tilted pyranometer) and 3D LiDAR capture tied to ground control.
- Output: Normalised delta-T work-order schedule (PDF, CMMS CSV and KML pins) delivered alongside classified 3D LiDAR terrain, tracker alignment and shading layers.

## Service area

South East Queensland and Northern NSW, including Sunshine Coast, Brisbane, Ipswich, Toowoomba, Gold Coast, Tweed Heads, Byron Bay and Lismore. Other regions by arrangement.

## Frequently asked questions

### What deliverables do I get?

Standard projects include a point cloud (LAS/LAZ), colourised point cloud, DEM, DSM, contour lines and a PDF accuracy report. Optional: orthophoto, 3D mesh, CAD/GIS formats.

### How accurate is the data?

Target vertical accuracy around 3 cm RMSE on open, hard ground with ground control; vegetation, terrain and site conditions affect results. Each project includes an accuracy report against check points.

### What's the turnaround time?

Target turnaround of about 48 hours for standard deliverables (point cloud and DEM) on smaller sites, counted from end of capture. Site dependent, not guaranteed.

### How is a project quoted?

Tell us about your site and the outputs you need, and we'll discuss scope. Enquiry only, no obligation and no payment. Enquiries welcome; earliest start dates are confirmed in each quote, subject to approvals.

### Do you work outside SEQ?

We're based in Palmwoods, Sunshine Coast. Standard service area: SEQ and Northern NSW. Other regions by arrangement.

### What file formats do you deliver?

LAS/LAZ point clouds, GeoTIFF elevation models and orthophotos, DXF/SHP contours and linework, and PDF reports. We deliver in your coordinate system and to your classification spec.

## Request a quote

Enquiry only, no obligation and no payment. Enquiries welcome; earliest start dates are confirmed in each quote, subject to approvals.

- Phone: 0466 538 887 (+61466538887)
- Email: info@droneondemand.com.au
- Request a quote: https://droneondemand.com.au/contact

---

Canonical HTML: https://droneondemand.com.au/
Drone On Demand Pty Ltd · ABN 79 639 850 365 · Palmwoods, Sunshine Coast QLD 4555, Australia
0466 538 887 · info@droneondemand.com.au
More: https://droneondemand.com.au/llms.txt · https://droneondemand.com.au/sitemap.xml
